(unless (edb-module-interpreted-p module)
    (error "Module is not interpreted, can't set breakpoints."))

(add-to-list 'load-path "/usr/local/lib/erlang/lib/tools-2.6.6.6/emacs")
(add-to-list 'load-path "/home/huang/.emacs.d")
(require 'erlang-start)

(add-to-list 'auto-mode-alist '("\\.erl?$" . erlang-mode))
(add-to-list 'auto-mode-alist '("\\.hrl?$" . erlang-mode))

(setq erlang-root-dir "/usr/local/lib/erlang")
(add-to-list 'exec-path "/usr/local/lib/erlang/bin")
(setq erlang-man-root-dir "/usr/local/lib/erlang/man")

;;(set-scroll-bar-mode nil)   ; no scroll bar, even in x-window system (recommended)
(require 'wb-line-number)
(wb-line-number-toggle)

(require 'flymake)
(defun flymake-erlang-init ()
  (let* ((temp-file (flymake-init-create-temp-buffer-copy
                  'flymake-create-temp-inplace))
      (local-file (file-relative-name temp-file
                      (file-name-directory buffer-file-name))))
    (list "path_to_eflymake_script" (list local-file))))

(add-to-list 'flymake-allowed-file-name-masks '("\\.erl\\'" flymake-erlang-init))

(require 'auto-complete-config)
(add-to-list 'ac-dictionary-directories "/home/huang/.emacs.d/ac-dict")
(ac-config-default)

(add-to-list 'load-path "/home/huang/.emacs.d/color-theme-6.6.0")
(require 'color-theme)
(eval-after-load "color-theme"
  '(progn
     (color-theme-initialize)))
(color-theme-lethe)

;;设置自动缩进
(setq indent-tabs-mode nil)
(setq default-tab-width 4)
(setq tab-width 4)
(setq tab-stop-list ())

;;取消警告声音
(setq visible-bell nil)
;;设置默认字体
(set-default-font "Bitstream Vera Sans Mono-10")
;;支持 emacs 和外部程序的粘贴
(setq x-select-enable-clipboard t)
;;隐藏菜单栏
(menu-bar-mode -1)
;;显示列号
(column-number-mode t)
;;高亮显示选择区域
(setq-default transient-mark-mod t)
(transient-mark-mode t)
;;括号匹配显示
(show-paren-mode t)
;;语法高亮
(global-font-lock-mode t)
;;关闭启动画面
(setq inhibit-startup-message t)

;; This is needed for Distel setup
(let ((distel-dir "/usr/local/share/distel/elisp"))
  (unless (member distel-dir load-path)
    ;; Add distel-dir to the end of load-path
    (setq load-path (append load-path (list distel-dir)))))

(require 'distel)
(distel-setup)

;; This is needed for Distel setup
(let ((distel-dir "/Users/bc/Projects/distel/elisp"))
  (unless (member distel-dir load-path)
    ;; Add distel-dir to the end of load-path
    (setq load-path (append load-path (list distel-dir)))))

(require 'distel)
(distel-setup)


;; Some Erlang customizations
(add-hook 'erlang-mode-hook
        (lambda ()
              ;; when starting an Erlang shell in Emacs, default in the node name
              (setq inferior-erlang-machine-options '("-sname" "emacs"))
              ;; add Erlang functions to an imenu menu
              (imenu-add-to-menubar "imenu")))

;; A number of the erlang-extended-mode key bindings are useful in the shell too
(defconst distel-shell-keys
  '(("\C-\M-i"   erl-complete)
    ("\M-?"      erl-complete)
    ("\M-."      erl-find-source-under-point)
    ("\M-,"      erl-find-source-unwind)
    ("\M-*"      erl-find-source-unwind)
    )
  "Additional keys to bind when in Erlang shell.")

(add-hook 'erlang-shell-mode-hook
        (lambda ()
              ;; add some Distel bindings to the Erlang shell
              (dolist (spec distel-shell-keys)
                  (define-key erlang-shell-mode-map (car spec) (cadr spec)))))

svnserve -d -r /home/svn --listen-host 192.168.1.231
echo 0 > /selinux/enforce
/etc/init.d/httpd restart

====================================================
Forbidden

You don't have permission to access /php.php on this server.

Apache/2.2.3 (CentOS) Server at 192.168.1.231 Port 80

echo 0 > /selinux/enforce
===================================================
tar jxvf *.tar.bz2

tar zxvf FileName.tar.gz

SVN->apr,aprutil,httpd,sqlite,zlib

==============================
/usr/bin/ld: /usr/local/lib/libz.a(crc32.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC

/usr/local/lib/libz.a: could not read symbols: Bad value

一般是64 位 电脑才会出现。


解决方法如下：

cd zlib-1.2.3 //进入zlib目录

CFLAGS="-O3 -fPIC" ./configure   //使用64位元的方法进行编译

make

make install

make clean
==============================
chkconfig --add mysqld 在服务清单中添加mysql服务
service mysqld start 服务启动
mysqladmin -u root password 'newpassword' 更改密码
mysql -u root -p mysql> Drop DATABASE test; 删除test数据库
mysql> Delete FROM mysql.user Where user = ''; 删除匿名帐户
mysql> FLUSH PRIVILEGES; 重载权限
添加mysql用户：
GRANT ALL PRIVILEGES ON my_db.* TO 'user'@'localhost' IDENTIFIED BY 'password';
==============================

ps aux|grep svnserv

netstat -nltp

/etc/init.d/httpd stop
httpd -k start
===============================
linux下SVN配置笔记

一、安装SVN默认安装到/usr/local/bin下面
二、创建仓库 svnadmin create /home/svnrepo
/root/svnrepo为所创建仓库的路径，理论上可以是任何目录

三、修改配置文件/home/svnrepo/conf/svnserve.conf
代码
#去掉#[general]前面的#号
[general]
#匿名访问的权限，可以是read,write,none,默认为read
anon-access = none
#认证用户的权限，可以是read,write,none,默认为write
auth-access = write
#密码数据库的路径，去掉前面的#
password-db = passwd

注意：所有的行都必须顶格，否则报错。
建议：为了防止不必要的错误，建议你直接用我上面的内容覆盖掉文件原来的内容

四、修改配置文件passwd。
代码
[users]
sxy = sxy

注意
1. 一定要去掉[users]前面的#,否则svn只能以匿名用户登录，客户端不会出现登录窗口，除非你的anon不为none,否则将返回一个错误。
2. 这里的密码都是没有加密的，我按照一些教程所说的用htpasswd生成的密码无法使用。
五、配置SVN xinetd启动方式：
在/etc/xinetd.d/下面新建svn文件
service svn
{
    disable = no
    port = 3690
    socket_type = stream
    protocol = tcp
    wait = no
    user = svn
    server = /usr/local/bin/svnserve
    server_args = -i -r /home/svn
}
重启xinetd   /etc/init.d/xinetd restart
六、停止SVN服务器：killall svnserve
七、启动SVN服务器
对于单个代码仓库
启动命令 svnserve -d -r /home/svn --listen-host 192.168.1.231

其中-d表示在后台运行，-r指定服务器的根目录，这样访问服务器时就可以直接用svn://服务器ip来访问了。如果服务器有多ip的话--listen-host来指定监听的ip地址.
我们可以在svn客户端中通过svn://192.168.1.16来访问svn服务器
对于多个代码仓库,我们在启动时也可以用-r选项来指定服务器根目录,但访问时需要写上每个仓库相对于svn根目录的相对路径.
比 如,我们有两个代码仓库/home/repo1 和/home/repo2,我们用svnserve -d -r /home --listen-host 192.168.1.16来启动,那么在客户端访问时可以用svn://192.168.1.16/repo1和svn: //192.168.1.16/repo2来分别访问两个项目
八、开放服务器端口
svn默认端口是3690，你需要在防火墙上开放这个端口。
      /sbin/iptables -A INPUT -i eth0 -p tcp --dport 3690 -j ACCEPT
      /sbin/service iptables save
你也可以通过svnserve的--listen-port选项来指定一个已经开放的其他端口,不过这样的话客户端使用也必须家上端口,如svn://192.168.1.200:9999/.

=======================================
collect2: ld returned 1 exit status
make[2]: *** [xmllint] Error 1
make[2]: Leaving directory `/home/ping.bao/libxml2-2.7.8'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/ping.bao/libxml2-2.7.8'
make: *** [all] Error 2

在configure 加上 --without-zlib 可以编译通过

=========================================
一，下载mysql5.5.12和cmake
wget http://mirrors.sohu.com/mysql/MySQL-5.5/mysql-5.5.12-linux2.6-i686.tar.gz
wget http://www.cmake.org/files/v2.8/cmake-2.8.4.tar.gz
二，安装cmake
mkdir /usr/local/cmake  
tar zxvf cmake-2.8.4.tar.gz  
cd cmake-2.8.4  
./configure  --prefix=/usr/local/cmake  
make && make install  
安装需要g++支持，这个一般linux里面自带的都有，如果没有自己装一下,yum,apt-get,pacman等，这一些管理包都可以装
三，安装配置mysql
1,创建用户和目录
groupadd mysql              //所以在这里我们要建一个msyql的用户和组  
useradd -g mysql mysql -s /usr/sbin/nologin  
mkdir /usr/local/mysql           //创建目录  
mkdir /usr/local/mysql/data              //数据仓库目录  
2，安装mysql
cmake -DCMAKE_INSTALL_PREFIX=/usr/local/mysql  -DMYSQL_UNIX_ADDR=/usr/local/mysql/mysql.sock  -DDEFAULT_CHARSET=utf8  -DDEFAULT_COLLATION=utf8_general_ci  -DWITH_MYISAM_STORAGE_ENGINE=1  -DWITH_INNOBASE_STORAGE_ENGINE=1  -DWITH_MEMORY_STORAGE_ENGINE=1  -DWITH_READLINE=1  -DENABLED_LOCAL_INFILE=1  -DMYSQL_DATADIR=/usr/local/mysql/data  -DMYSQL_USER=mysql
  
make && make install  
//安装mysql默认的数据库  
scripts/mysql_install_db --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --user=mysql  
cp support-files/my-medium.cnf /usr/local/mysql/my.cnf //copy配置文件  
chown -R mysql:mysql /usr/local/mysql //更改权限  
nano /usr/local/mysql/my.cnf  
//加上以下内容  
[mysqld]  
basedir = /usr/local/mysql  
datadir = /usr/local/mysql/data  
log-error = /usr/local/mysql/mysql_error.log  
pid-file = /usr/local/mysql/mysql.pid  
user = mysql  
tmpdir = /tmp  

cmake的时候，参数可以不用那么多，只要一个-DCMAKE_INSTALL_PREFIX=/usr/local/mysql就行了，我们可以在my.cnf里面配置。[mysqld]中的内容，看看你copy后的my.cnf有没有这些设置，有就不用了在设置了。
3，启动mysql
cd /usr/local/mysql/support-files/  
cp ./mysql.server /etc/init.d/mysql5  
/etc/init.d/mysql5 start  
用cmake安装mysql,根configure安装mysql差不多，只不过前面不同而已。

==============================
apache 忽略大小写
mod_speling
CheckSpelling on
================================
php.ini-production对应于php.ini-recommended
php.ini-development对应于php.ini-dist

mysqli模块的安装
　　################
　　记得原来在编译php的已经已经加上参数
　　--with-mysql=/usr/local/mysql
　　--with-mysqli=/usr/local/mysql/bin/mysql_config
　　可后来找了一个，的确不存在mysqli.so，所以只能单独来编译mysqli了。
　　mysqli是优化过的mysql函数库，MYSQL版本不能低于4.1.12
　　cd /root/php-5.2.17/ext/mysqli      如果没有请到 www.php.net下载php即可
　　#####进入到mysqli的目录。
　　再用phpize生成configure文件:
　　/usr/local/php/bin/phpize
　　Configuring for:
　　PHP Api Version:　　 　 20041225
　　Zend Module Api No:　　 20060613
　　Zend Extension Api No:　220060519
　　#./configure --prefix=/usr/local/mysqli --with-php-config=/usr/local/php/bin/php-config --with-mysqli=/usr/local/mysql/bin/mysql_config
　　make
　　make test
　　make install
　　Installing shared extensions:　　/usr/local/php/lib/php/extensions/debug-non-zts-20060613/
　　然后在/usr/local/lib/php.ini
　　加上一句：
　　extension=/usr/local/php/lib/php/extensions/debug-non-zts-20060613/mysqli.so
　　重新启动apache即可看到已经加载mysqli成功。

===============================================
Q:
有人在使用Redhat Linux時，不小心執行了：
#chmod -R 0777 /tmp
導致重新啟動無法進入GNOME,出现GConf error:Failed to contact configuration server;some possible cause are that you need to enable TCP/IP networking for orBIT or you have stale NFSlocks due to a system crash,see http://www.gnome.org/projects/gconf/for information.(details -1:IOR file '/tmp/gconfd-root/lock/ior' not opened successfully;no gconfd located;no such file or directory2;IOR file '/tmp/gconfd-root/lock/ior' not opened successfully;no gconfd located;no such file or directory)

A:

#cd /tmp/
#rm -R 你的用户名相关的文件夹
假设用户名是user,就是这样的#rm -R *user*
再删除用户主目录下的.gnome2 和.gnome两个文件夹
重新就x就好了

=========================================================

Permissions 0755 for '/etc/ssh_host_key' are too open.
执行以下命令:

# cd /etc/ssh
# chmod 0644 *
# chmod 0600 ssh_host_dsa_key ssh_host_key ssh_host_rsa_key
# /etc/init.d/sshd start
starting sshd：      


=========================================
编译PHP

./configure --prefix=/usr/local/php --with-iconv=/usr/local/  -with-mysql=/usr/local/mysql --enable-force-cgi-redirect --with-libxml-dir=/usr/local --with-freetype-dir=/usr --enable-gd-native-ttf --with-ttf  --with-gettext --with-iconv --with-zlib --with-xml --enable-calendar --with-apxs2=/usr/local/apache2/bin/apxs --with-mcrypt --with-mbstring --enable-mbstring=all


make: *** [sapi/cgi/php-cgi] Error 1
make ZEND_EXTRA_LIBS='-liconv'


APACHE重启报错：/usr/local/apache2/modules/libphp5.so: undefined symbol:
重装PHP报错
make: *** [sapi/cli/php] Error 1
重装libxml2

pdo:
./configure --with-php-config=/usr/local/php/bin/php-config --enable-pdo=shared

pdo_mysql:
./configure --with-php-config=/usr/local/php/bin/php-config --with-pdo-mysql=/usr/local/mysql